Tyger Auto T1 Soft Roll Up Truck Bed Tonneau Cover Compatible with 2016-2022 Toyota Tacoma (Does Not Fit Trail Special Edition with Storage Boxes) | Fleetside 5′ Bed (60″) | TG-BC1T9044

Add your review

Add to wishlistAdded to wishlistRemoved from wishlist 0

 

Top Positive Review

This seems to be a very good cover for the price. The install was actually very simple, and does fit the 2021 Tacoma SR double cab (5ft bed). Some points in case it helps people:

1. You could easily overtighten the front turn knob clamps so be careful
2. I only used the weather stripping in the corners, and I didn’t it it on the vehicle but on the corners of the cover
3. They include 2 rectangle foam bits to put towards the front of the bed to help with waterproofing. These would be nearly impossible to put in by itself because the fit is too tight. If it helps, I used two insurance cards on either side (the thin white laminated ones), and that compressed it and slid right in. Then I spent 5min or so carefully removing each card.
4. in terms of fit, the clamps on the back only *really* fit properly if you remove the plastic end caps on your rail system and slide the included brackets right up to the edge. The entire thing still fits perfectly, but the rail system is *almost* too short.
5. The back clamps don’t put enough pressure on the back of the cover for me to think it’s *completely* waterproof, but I wouldn’t remotely buy this is you were hoping for that. It’ll still probably keep out 99% of the weather if everything is snug.
6. The safety clamps on the front are just about worthless. They have some soft pads on them – remove those because that just makes them slide off. Otherwise, the safety clamps just squeeze a tiny bit of the bracket and if I was going down the highway and the other clamps failed – those things would snap right off. It’s a good idea, but it’s not designed to fit the bracket – they should really include something else for the rail system folks.
7. Some people talked about an included LED light, I didn’t get one so I have no idea about that.

Top Critical Review

Nice product. Well designed to fit Tacoma double cab. Very easy to install except … left side would not latch. Right side worked great. De-installed – reinstalled – moved clamps – latched corner with side unattached – reinstalled – adjusted forward and aft – adjusted side to side – adjusted tension to various positions … wouldn’t latch. Measured mechanisms and tracks with gauge on both sides to troubleshoot. Called for my wife (now it’s getting serious). “Pound on it!. “Hump down with all your weight” Latched! Won’t unlatch. Takes determined pounding, jumping and humping to latch and unlatch. After repeated latching and unlatching it seems to have worn in a bit. What seemed a very easy 30 minute install including unboxing became a 3 hour aggravation and a sore fist. Neighbor enjoyed the show and the “color” commentary.

Nice product otherwise. Could have been 5 stars.

Customer Questions & Answers

 

User Reviews

0.0 out of 5
0
0
0
0
0
Write a review

There are no reviews yet.

Be the first to review “Tyger Auto T1 Soft Roll Up Truck Bed Tonneau Cover Compatible with 2016-2022 Toyota Tacoma (Does Not Fit Trail Special Edition with Storage Boxes) | Fleetside 5′ Bed (60″) | TG-BC1T9044”

Tyger Auto T1 Soft Roll Up Truck Bed Tonneau Cover Compatible with 2016-2022 Toyota Tacoma (Does Not Fit Trail Special Edition with Storage Boxes) | Fleetside 5′ Bed (60″) | TG-BC1T9044
Tyger Auto T1 Soft Roll Up Truck Bed Tonneau Cover Compatible with 2016-2022 Toyota Tacoma (Does Not Fit Trail Special Edition with Storage Boxes) | Fleetside 5′ Bed (60″) | TG-BC1T9044
Electronics Reviews and Ratings of Amazon Products
Logo
Enable registration in settings - general
Shopping cart